Save up to 75% on your track wheels

Save up to 75% on your track wheels

In recent years there has been an increasing demand for rubber tracked tractors.  A key factor in their growth in popularity is that tracks undoubtedly give a better vehicle weight distribution in wet conditions and allow access to fields where the standard four wheeled tractor cannot go.

One drawback of the tracked systems available, is the maintenance expense. Rather than simply replacing worn tyres, as on a traditional four wheeled tractor, the track system requires complete replacement of the wheels once the tyre becomes worn.  However, in 90% of replacements only the tyre is worn and the steel hub is often perfectly re-usable, adding unnecessary expense to replacement parts.

To solve this issue, we at Clifton Rubber, have developed a proven method for replacing worn tyres.  They will strip off the unusable rubber or polyurethane tyre and mould a new tyre directly to the original hub.  They have the capability to refurbish all types of wheel for all types of tracked vehicle, from main drives to the mid and idler wheels, with service exchange wheels available off the shelf for the most popular models.  The result is a high grade, abrasion resistant tyre with good tear strength and longevity.

We receive regular feedback from customers, stating that their refurbished wheels offer similar wear characteristics to the original wheels but at a significant cost saving, often as much as 75% cheaper as going straight to the manufacturer.

Track Wheel Main Image

LATEST NEWS

27th May 2021

A New Welder joins the Team

Our new Fabricator & Welder, Gerry Bateman joins us with a wealth of experience from previous roles and his interests outside of work.

Read More    ›
12th May 2021

Save up to 75% on your track wheels

Refurbished wheels offer similar wear characteristics to the original wheels but at a significant cost saving, often as much as 75%!

Read More    ›
28th April 2021

We Welcome a New Design Engineer to the Team

We are delighted that Alastair Miles has recently joined the company as our Design Engineer.  

Read More    ›
6th April 2021

The Sales Department Welcomes a New Team Member

We are delighted to welcome our new team member, Andrew Meddings, who joins us in the Sales Department, replacing retiree Bernie Hall.

Read More    ›
17th November 2020

Drive for Improvement in our Dedicated Mould Store and Multiple Press Shops

Here at Clifton Rubber we are always striving to improve our manufacturing capabilities and our service to our customers in…

Read More    ›
2nd September 2020

Clifton Rubber are Going Green and Improving Efficiency with New Equipment

We are proud to announce the installation of new equipment at our head office. Here at Clifton rubber we are…

Read More    ›
2nd April 2020

Coronavirus Update – We Are Open

We wanted to inform our valued customers that we are continuing to operate during these unprecedented times and are open…

Read More    ›
19th December 2018

Christmas 2018

Thank you to all our customers and suppliers for helping us achieve a successful 2018.   We hope you all have…

Read More    ›
EnglishFrenchDutchGermanSpanishItalian